APTA: Commuter rail industry makes progress implementing PTC

Written by Mischa Wanek-Libman, editor
image description
APTA

The American Public Transportation Association (APTA) says its members are making "significant progress" toward implementing positive train control (PTC) and are on schedule to meet the December 2018 deadline.

The analyses were based on surveying APTA members and assessing the quarterly reports submitted to the FRA for the last quarter of 2016. It also showed that given the priority of PTC, there remains significant investment backlog for State of Good Repair (SOGR) and expansion projects, including upgrades and replacement to track, bridges, rolling stock and facilities. Since APTA’s last quarterly report, the Federal Transit Administration has updated the SOGR for the public transit industry, which has increased to $90 billion.

“The commuter rail industry continues to make significant progress in implementing PTC,” said APTA Acting President and CEO Richard A. White. “The progress on this complex safety technology demonstrates the industry’s relentless focus on safety.”

According to APTA’s analyses, some of the results are as follows:

  • 23% of the 3,150 route miles are either in service or in full PTC demonstration mode, while awaiting Federal Railroad Administration (FRA) approvals;
  • 30% of the 3,400 locomotives and cab cars are installed with PTC hardware;
  • 40% of the 35 back office control systems are ready for operation;
  • 70% of spectrum has been acquired and 50% of the 1,000 radio towers have been erected;
  • 24% of the 13,000 employees have been trained in PTC; and
  • 19% of commuter rail agencies were 100 percent PTC equipped by the end of 2016.

APTA notes that the delivery of PTC is highly complex, requiring the development of safety critical software; installations on 3,150 miles of track; 3,400 locomotives; 1,000 radio towers and training more than 13,000 employees.

“The installation of PTC is challenging for a number of reasons, including from a technical perspective. PTC was not a mature technology when Congress mandated it in the Rail Safety Improvement Act of 2008,” said White. “Beyond the technological challenges that have to be addressed, there are significant issues in regard to the costs, scarce qualified resources and adequate access to track and locomotives for installation and testing.”

The association says PTC implementation is expected to cost the commuter rail industry more than $3.5 billion in capital expenditures, which includes more than $16 million in spectrum acquisition, as well as $100 million annually in additional maintenance costs.

Funding remains a critical concern for the commuter rail agencies, all of which are publicly funded. APTA explains that currently, $75 million has been awarded to commuter rail agencies through federal grants designated specifically for PTC implementation. Additionally, $199 million was authorized by Congress but has yet to be appropriated. Finally, a $967 million loan from the U.S. Department of Transportation was made available to one commuter rail agency for PTC implementation.

“On behalf of the commuter rail industry, I urge Congress to quickly make available the $199 million authorized by the Fast Act for FY 2017 and consider providing additional resources to support industry efforts to meet the congressional deadline,” said White.

 

Tags: